Peugeot 308 Key Fob Replacement
Peugeot's 308 may be catching on a bit but it's still appealing. It's not the most luxurious car in its class, but it's an enjoyable and relaxing driving experience.
Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. The following suggestions will help whether the problem is intermittent, or constant.
Water Damage
If you accidentally drop your key fob in a puddle, or if it gets wet while kayaking, canoeing or rafting or canyoning it is likely to be damaged by water. Keep your key fob in a dry bag whenever you go outside or engage in things that expose it to large amounts of water.
peugeot 208 spare key 'll also want to make sure that the fob is dry before opening it up and reusing it. If you detect any smells coming from the fob, like an industrial-like liquid smell or windshield washer fluid, it's another sign that it's submerged in water.
A wet circuit may cause the battery's charge to be drained or even explode. If you are able to get your keyfob 308 out of the water it is best to turn the button side up and shake as much water as possible before opening the casing. When you've opened it, take out the battery and wipe the circuit board with the help of a cotton swab that has been dipped in 90-percent isopropyl alcohol.
Other reasons why your Peugeot 308 remote keyless entry system could not function include a dead battery for your coin or receiver module issue signal interference, an electronic chip that is defective. If none of the above is the issue you can restart the system by disconnecting 12 volt battery from your car for 15 minutes.
Dead Coin Battery
Peugeot cars are equipped with a remote-start feature that allows the driver to start the car from a distance and then warm up or cool down the vehicle prior to getting in. This feature is extremely helpful particularly during the winter's cold and chilly months. The remote start system may cease to function for a variety reasons, such as a dead coin-battery.
The coin-shaped battery contained inside the key fob could last between two and four years based on how frequently it is used, the location it was purchased, and the way it is utilized. Its use-by date is typically printed on the package or in the manual.
If the key fob stopped functioning after being exposed to pure tapwater, you need to remove the battery and clean the electronic chip with an absorbent paper towel that has been soaked in isopropyl ethanol. Then, dry the chip thoroughly before replacing it. In case of exposure to salty or soapy water, the chip might be damaged and you'll require replacing the key fob entirely.
If you're unsure whether the battery is defective it is possible to check the voltage using a multimeter that is connected to both the minus and plus terminals. If the voltage is less than 12-13 volts, then you need to replace the battery. If you want to, you can try to reset the on-board computer by disconnecting the battery at 12 volts for a short period of time, and then reconnecting it in reverse order (positive cable first, then negative). The engine should then start.
Faulty Receiver Module
If you're unable to see the "Key Detected" message on your dashboard, it's possible that your receiver module has discovered a problem. It's the part that sends an alert to the car when your key fob is activated that also acts as an immobiliser, and stops it from starting until the correct key is used.
This could be due to a variety of reasons, including water damage or simply aging. If your Peugeot 308 key fob has been exposed to dirty tap water, as in the chip that is located inside the device will be damaged. In this scenario, you'll have to remove it and clean it thoroughly using isopropyl or an electronic cleaner. When the battery is clean you can attempt to test it again.
If the problem persists you're probably in need of a idea to seek out an area Peugeot specialist or locksmith. They can employ an instrument for diagnosing to identify the issue and then fix it.
The loss of your Peugeot keys to your car is an incredibly stressful experience. A qualified auto locksmith can solve the problem within minutes. They can cut a new key and then program it into your vehicle, ensuring that you're off the road in the shortest time possible. Click here to find locksmiths near you.
Faulty Electronic Chip
The electronic chip inside your Peugeot 308 key fob is a very crucial component of the remote control system. If the chip is damaged, you may have problems starting your car or receive a message that says "anti-theft". In this case the only option is to replace the key. Fortunately, auto locksmiths with experience can complete the task within the shortest period of time.
The chip in the key fob of your Peugeot 308 could fail due to a variety of reasons, including water damage, sweat or dirt. If your Peugeot 308 key fob has been exposed to soapy water, you should cleanse it immediately. You can make use of a paper towel and isopropyl alcohol to wipe the electronic component. After that, allow the battery to dry completely.
Sometimes keys can be inoperable due to radio interference. This could be caused by other devices operating at the same frequency as your Peugeot key fob. This can be caused by problems with the environment or objects in the vicinity of the vehicle. It is recommended to see a Peugeot dealer if you encounter this problem.
The Peugeot 207/308 key fob is very delicate and requires extra care. It is essential not to drop or throw the key fob. If you lose it, try to find it as quickly as you can. You can reset all on-board computers by disconnecting the battery that is 12 volts for a few minutes. Remove the negative cable before the positive.